MEET THE NEW CUFF BRACELETS

Okay, I've been talking about the new cuff bracelets I've been making for weeks and weeks. It's about time they actually made an appearance on my blog. (My apologies, by the way, for being so completely absent of late. I got sick, followed by rather lazy, followed by way too busy trying to make up for the first two things in this sentence!)

The bracelets came about because a stack of nice, but small, faux leather samples from a local design house came face to face with my deep reluctance to throw anything remotely useful away. What, I wondered, could you make with something that little?

Here's what I came up with:


That's one of the very first styles I came up with. Basically, if you want to do your own, you cut a piece of faux leather a little larger than 4" X 6" (10.2cm X 15.2cm). Attach a button or buttons. Placement will depend on where you want the decoration to be in relation to the lacing--near one end if you want it right next to the laces, or in the middle, if you want the button to ride on top of your wrist.

Once the button is securely attached, fold your piece in half lengthwise, and sew about 1/4" to 3/8" (0.6cm to 1cm) from the edge. Pink the sewn edge, and punch five holes on each end. Cut a length of elastic cord about 24" (61cm) long, and lace through the holes like you would a shoe. Lace each end of the cord through two holes of a four-hole button, and tie a knot. You can cinch the laces tight after the cuff is on your wrist, using the button.



After I did some simple button adornments, it occurred to me that the scraps from cutting the cuffs could also be put to use, and I did this:


Then the idea of using pinked disks of colorful fabrics popped into my mind:


You'll notice there are a few beads, too, I'm sure.

A couple more:






save

MORE SHANK BUTTON JEWELRY DESIGNS

Yesterday felt like a day to make a bracelet, so I did. Then I made earrings to match, and then more.

In the past, finding a way to incorporate shank buttons in jewelry has kind of stymied and frustrated me, because there are so many really beautiful buttons just crying to be used. I begin to think I've found the answer.

So, if you want to try this, you might start here:

A Small Shank Button Tutorial

because that's actually where I started. The bracelet simply enlarges on it. So, pictures first, and then a bit of explanation on the difference between using the buttons for a bracelet and using them for earrings.

This is the finished bracelet:


And this is what I used:

• 5 vintage shank buttons, about 5/8" (1.59cm)
• 5 charcoal mother-of-pearl flat circle beads, about 1" (2.54cm) in diameter
• 12 oblong vintage black plastic "jet" beads, about 1/2" (1.27cm) long
• 12 head pins, 2 1/2" (6.35cm) to 3" (7.62cm) long
  
• 36 black seed beads
• 2 round vintage plastic "jet" beads
• 4 small silver bead caps
  
• 1 clasp
• Non-tarnishing silver wire, 20 gauge

Here's a photo of the back of the bracelet:

As you can see, I didn't fill the gap between the shank of the button and the ring bead, which added one more possibility for movement to the piece. It also wasn't necessary to bring the wire to the back of the bead to prevent the beads' spinning to show the wrong, or back, side--your wrist will do that.

So the process would be to make a wrapped loop on one end of a piece of wire about 2 1/2" (6.35 cm) long, string on one side only of the circle bead, then the shank button, and then run the wire through the other hole in the bead, ending in another wrapped loop. After the first bead group, of course, you'll want to join the wire-wrapped loops as you go, to create a chain of wire, buttons, and beads.

When you've joined the five buttons, measure the bracelet to your wrist, to see if you need another button-bead link. My wrist measures about 6 3/4" (17.1 cm), so five was about right. More length will be added by the clasp assembly, in this case a silver capped bead wire-wrapped to each part of the clasp and the bracelet ends.

After you've created the basic bracelet, string the head pins:

• 4 head pins strung with one oblong bead and three seed beads
• 4 head pins strung with one oblong bead and two seed beads
• 4 head pins strung with one oblong bead and one seed bead

Attach one of each group to the loops joining the bracelet links, using a wire-wrap or simple loop. (I prefer to wire-wrap, as it's sturdier, and looks nice, myself.)

Note: While my seed beads were all technically the same size, I did pick through and put a slightly smaller bead on the top of each stack.

To make the matching earrings, I followed the process given in the A Small Shank Button Tutorial.

With these earrings, I did fill the space between the button shank and the inside edge of the circle beads, as I wanted the button to be centered on the ring. The beads you'll need for that will depend on the dimension of the button shank.

As you can see from the photo, I also brought the wire used for the stringing and upper loop to the back, to provide that spin-stopping function.

Finish the earrings with a dangle made from one oblong bead and a seed bead, and add the earring wires.

Just for fun, here are three more pairs, made using the same basic technique:


Notice that in the last pair, I brought the spin-stopping wire to the front, for some extra design oomph.

Well. That was fun for me. Hope it gives you some fun, too!

save

NECESSITY BREEDS A NEW WIRE WRAP

This may be new only to me, but I love it anyway.

One of the things I like about a car trip, if I'm not driving, is that bright expanse of free time. Really free. I can't do dishes, or laundry, or weed the flower beds. I have to sit, and if I'm going to do something, the options are limited. Reading, going over my music, crocheting, or what I did yesterday, beading.

I worked on Button Stack Bracelets, finishing three I'd already started, and almost a fourth, brand-new one. On that one, I did all the button stacks first, and then turned my focus to creating the chain to put the stacks on. Now, where was that 20-gauge gold wire...?

Oh, no! I was sure I'd put it in, but it was nowhere to be found! I stared at what I had, a spool of 24-gauge that was much finer than I'd want to use for a bracelet chain. What to do?

Ooooh. The idea was ripe for the plucking, and solved a problem that had nothing to do with the lost wire: I don't like it when the end of a wire can be felt, and when I'm doing a wire wrap on a bead, that happens all too often. Up until yesterday, the only solution was to struggle with the wire until it would properly tuck in, or file the end down if it proved too stubborn.

But what if I worked with a fine wire, doubled?

Here's what I came up with:

Gather your tools and materials--


Two sizes of wire shown for comparison

• 24-guage wire


• Wire snips


• Round nose pliers


• Flat nose pliers


• Bead

Cut a length of wire about six inches long, then fold it in half.


Loop it over one side and pull taut

Flatten the doubled end with your flat nose pliers as tightly as you can.


Squish!

Measure your folded wire against the bead you'll be using, leaving enough length for wire wraps on both ends.


That looks about right

Start a "regular" wire wrap, working with the cut ends of the wire


So far, so normal

When you've done a wrap and a half or so, lay the ends flat against the rest of the wire length. If your wire ends are longer than the bead you're using, snip them off.


Those ends will be hidden inside the bead

Slip the bead over the doubled end of the wire, and complete the wrap. I've shown what would be the first bead in an assembly, and not left it open to accept another.


No sharp ends anywhere

If you cut your folded wire extra long, you can have extra fun.


Curls and loops



More curls and loops

I finished the bracelet this morning, and am quite pleased with it. The photo with the brown background is the truer color. There's actually no blue in the bracelet at all.


Brown Button Stack Bracelet



Same bracelet, but taken in the shade